<![CDATA[0xbt: March 2020]]> https://0xbt.net/blog/archive/kimminseok/1583020800/1585699200 https://0xbt.net/blog/view/124340/the-corrosion-of-palm-oil-chain-is-related-to-many-factors Wed, 18 Mar 2020 02:34:50 +0000 https://0xbt.net/blog/view/124340/the-corrosion-of-palm-oil-chain-is-related-to-many-factors <![CDATA[The Corrosion of Palm Oil Chain Is Related to Many Factors]]> When the equipment is used for a long time, each component will tend to age or gradually fail, as will palm oil chain. The common phenomenon is chain corrosion. Apart from time, what other reasons can lead to similar problems?

1. Palm oil chain rusts due to lack of antirust treatment.

In the production process of palm oil chain, operators did not carry out the anti-rust treatment in strict accordance with the production requirements and did not adopt anti-rust packaging. Once it comes into contact with corrosive liquid and gas, corrosion will occur.

2. The palm oil chain rust is caused by the substandard quality of antirust oil.

Even though products such as antirust lubricating oil and clean fire oil have been applied to palm oil chain, if the quality of the products does not meet the technical requirements, it will be in vain and will also cause the corrosion of palm oil chain.

3. Corrosion of palm oil chain is related to chain materials.

In order to reduce the production cost of palm oil chain, some manufacturers choose unqualified materials, such as high content of nonmetallic impurities in the steel, which will reduce the anti-corrosion ability of the formed chain itself and lead to similar defects.

4. Palm oil chain corrosion is related to the operating environment.

When palm oil chain works in poor conditions for a long time, they will think that the content of harmful substances is too high, or the space is too small to carry out antirust treatment, thus causing adverse effects on the chains.

For more product details, please click on our official website: https://www.getechain.com/

]]> kimminseok https://0xbt.net/blog/view/123045/use-leaf-chain-in-wet-or-high-temperature-environments Wed, 11 Mar 2020 04:54:33 +0000 https://0xbt.net/blog/view/123045/use-leaf-chain-in-wet-or-high-temperature-environments <![CDATA[Use Leaf Chain in Wet or High-Temperature Environments]]> When using the leaf chain, it should not be pulled too tightly. Once it is pulled too tightly, a large forced bundle torque will be formed between the countershaft and the rear wheel buffer body, and then the bearing will be damaged under the influence of the torque, thus reducing the service life of the chain.

In addition, in this case, the stress on one side of the leaf chain bearing will become larger, which is easy to cause damage due to heating. Even if it is not damaged, it will form a larger gap in a short time. Once there is a large gap between the bearings, the straightness of the countershaft will be damaged.

Therefore, it is only necessary to do a good job of protection in order to prolong its service life and save the input cost for users. Leaf chains are combined with wheels with cogged buckle teeth to engage blocks with the pitch on chain links or cables, so errors can be avoided if the two can be produced together.

When the leaf chain is used in humid or high temperature environment, corresponding protection measures must be taken, otherwise, not only the leaf chain's due function cannot be fully exerted, but also its service life may be shortened.

For more product details, please click on our official website: https://www.getechain.com/

]]> kimminseok