0xbt: lianggong's blogs

Installation And Installation of Paddy Cleaner Equipment

lianggong — Fri, 07 Dec 2018 00:56:40 +0000

Precautions for installation of Paddy Cleaner(LIANGGONG) equipment:

1. The installation needs to choose the right power and environment choice

When the equipment is installed, it is necessary to pay attention to the choice of environment, so that the machine can operate normally, and attention should be paid to the safety of ventilation. A large amount of dust accumulation will cause certain safety hazards. In addition, the installed lines, etc., should have corresponding protective measures.

2. The feeding speed of paddy cleaner equipment needs to be suitable

General paddy cleaner processing has a limited feeding speed. If the feeding is too much or too fast, the mechanical load will increase, the cleaning effect is not ideal, and the mechanical blockage is easily caused, which affects the normal operation of the paddy cleaner equipment, so it is necessary to pay attention to the feeding the speed is right.

3. Regularly check the vulnerable parts of the paddy cleaner

During the cleaning, the operator needs to strictly follow the operation requirements for production. If abnormal conditions are found during use, the equipment should be stopped in time to check the problem. If there is serious noise, or the equipment is running abnormally, check whether the equipment bearing is short of oil. Whether the transmission part connection is tight or the like. For parts that are easily damaged, it is necessary to check and replace them in time.

Click Rice Destoner to learn about more information.

The Separation Effect of The Paddy Husker Is A Key Indicator

lianggong — Thu, 22 Nov 2018 02:02:18 +0000

Many people are confused about buying agricultural machinery such as the Paddy Husker(LIANGGONG). That is, he doesn't know what parameters he needs to see. He doesn't know how to choose a high quality paddy husker. Don't worry, after reading this article, you may suddenly realize.

In fact, the purpose of selecting the paddy husker is to separate the rice and brown rice more efficiently. It is these things that can be separated without too much labor. Under the guidance of this purpose, we can know what we need: First, efficient automation, which requires the husker effect of the paddy husker to be stable, does not require additional manual assistance, and if you need to do a lot of work manually after husker, it means that this mechanical design can't. Second, efficiency, the pursuit of husker is the efficiency of paddy husker, if it is very slow and artificial, then it is not as good as direct manual husker, why bother? The efficiency is also very important.

The company reserves the secondary and senior management, production and technical professionals to supply high-quality products and excellent service based on the scientific management and latest technology. It sticks to the tenet of “quality foremost, faith as essential”to insistently respond customers with high-quality products and perfect after service.The sales networks of the company are covered all over China as well as South American, South East Asia, Africa etc.The company cordially welcomes all of you to visit us for the win-win future.

Click Paddy Separator to learn about more information.

The Rice Polisher Is Sold All Over The Country

lianggong — Fri, 16 Nov 2018 01:52:25 +0000

The Rice Polisher(LIANGGONG) is relatively popular all over the country. It is a very popular agricultural machine. So, as an agricultural machine, why is the rice polisher more popular than other ones?

1. It has a great effect. As an agricultural machinery, the most basic requirement that is welcomed by the market is that it has a good effect, so it is very functional. The rice polisher has a very powerful function of polishing brown rice and rice. It was only welcomed by everyone.

2. High recognition, and excellent agricultural machinery, if only recognized in the minority crowd, it does not really play a role, the advantage of the rice polisher is that it can be used in the separation of many crops, so it is recognized The degree is also higher and the popularity is higher.

Click Rice Whitener to learn about more information.

Maintenance The Paddy Cleaner

lianggong — Thu, 15 Nov 2018 00:37:45 +0000

As a large-scale agricultural machine, the Paddy Cleaner(LIANGGONG) is very demanding for maintenance. Otherwise, it will be problematic if it is used frequently or if it is not used for a while, then how should the paddy cleaner be used and maintenance?

1. Regularly clean the inside of the paddy cleaner. The paddy cleaner will have a lot of debris during operation and production. After all, there are still many impurities in the middle of the rice. We clean these things regularly. So that it will not affect the continued use behind.

2. The replacement of lubricating oil, etc, no matter what agricultural machinery, the use of diesel oil and lubricating oil is very important. To maintain the use of high-quality grease at all times, the grain-removing machine must be regularly replaced with lubricating oil. Wait, keep it clean, not a lot of impurities and dust.

Click Rice Destoner to learn about more information.

Rice Huller Machine Continuously Processed

lianggong — Mon, 12 Nov 2018 02:00:54 +0000

The Rice Huller(LIANGGONG) is automatically and continuously processed from rice cleaning, stone removal, shelling, grain separation, whitening, and white rice classification. The whole machine has beautiful appearance, compact structure, small floor space, no hidden rice, high rice yield, less broken rice and low power consumption. When the rice is in the machine, the standard finished rice can be obtained in one process. The white rice that is processed into rice for consumption must be cleaned, such as Shibuya (to the outer shell) and rice (to the rice). The Shigu machine has two upper and lower sanding discs, one for the moving plate and one for the fixed plate. Due to the rotation of the moving plate, the rice is erected between the two plates, and the two ends are ruptured by the shearing action of the diamond disk, and then removed by the cleaning mechanism. After the shell is removed from the shell, it is called brown rice, and then the brown rice is crushed to the epidermis to become rice.

Paddy huller machine precautions

(1) The cleaning sieve body should be smooth, intact, stable in operation and free of abnormal noise.

(2) Pay attention to check the grain content in the sieve under the operation. If there is too much grain, the cause should be identified and corrected.

(3) When the sieve hole is clogged, it should not be knocked with iron or hard objects. The long plate brush can be used to remove the blockage; the broken surface of the sieve surface should be repaired or replaced in time.

(4) There should be no collision sound during fan operation. After the feed, check the stone, miscellaneous and row of stones and impurities in the raw materials. If there is too much grain in the sand, the cause should be identified and excluded.

(5) The stone machine sieve plate and each damper should be kept open, and the wire hole should be cleaned by wire brush. Do not hit it to avoid damage.

(6) When adjusting the eccentric rotating mechanism, loosen the rubber pad fastening device, tighten it after tightening, so that it is in the state of no prestress.

Click Rice Grader to learn about more information.

Vertical Negative Pressure Water Mill Rice Polisher Machine

lianggong — Fri, 02 Nov 2018 02:33:10 +0000

The utility model patent is a novel rice deep processing equipment which does not need any additives, removes rice bran powder and improves the quality grade of rice. At present, the Rice Polisher(LIANGGONG) machine equipment used in China mostly adopts horizontal or double-roll vertical structure, and the main part polishing roller adopts the process of ribbing, which is large in volume, large in energy consumption, complicated in structure, high in manufacturing cost, and in producing rice.

When the breaking rate is high, the effect is not ideal, and the rice polisher machine overcomes many technical problems, overcomes the above weaknesses, and makes the structure simple and efficient. For the manufacturers of production equipment, the production cost is greatly reduced. As far as the weight of the whole machine is concerned, the rice polisher machine has only one-third of the weight of other rice machines, and the production materials are wide, easy to obtain, reasonable in price, and simple in manufacture. Therefore, the rice machine produced can be accepted by the majority of users.The model of the rice polisher machine can be large or small, and can be sized according to the needs of the user.

Click Rice Whitener to learn about more information.

Research Status of Rice Grader Machine

lianggong — Thu, 01 Nov 2018 03:10:41 +0000

Rice Grader(LIANGGONG) remover has two layers of sieve surface, the upper sieve surface can separate part of light wheat, and the relative load of the lower layer of stone removal screen is reduced, so the output is higher than the single specific gravity stone machine of the same specification, so it is obtained in the wheat processing factory. widely used. In recent years, many wheat processing plants have undergone some changes in the operation of the gravity grading stone remover at the stage of the wheat cleaning stage. The upper sieve has only a small amount of light wheat and light impurities, which are mixed with the lower feet. It is crushed by a pulverizer and used as a by-product. The gravity grading stone removal machine set in the light wheat cleaning stage adopts normal operation, that is, the upper sieve surface can separate about 30% of light wheat, and the lower sieve surface separates heavy wheat at the same time as the stone removal, but after the separation, The light and heavy wheat is combined into the next cleaning process, and then into the 1 grinding mill. Therefore, the grading function of the gravity grading stone remover has not been exerted.

At present, the classification and purification of grinding materials in the design of wheat milling technology has received great attention. The classification of materials has become more and more refined, and the range of cleaning powder has become wider and wider. Many wheat flour milling processes have been set up with 10 channels. Clear powder. There are relatively few grading studies on processing materials. At present, the relevant experiments mainly test and analyze the physical and chemical properties, silty properties and gelatinization characteristics of different wheat before and after gravity Grading stone grading in two actual wheat processing production lines, and explore some basic rules of wheat quality change. The hierarchical processing provides theoretical basis and technical support.

Click Rice Huller to learn about more information.

Grain Cleaning And Food Dust Removal Process

lianggong — Wed, 31 Oct 2018 02:50:43 +0000

We know that the raw materials in the grain processing process are all bulk materials, and there are impurities in the production and processing. Therefore, before the grain processing or during the whole grain processing, must be cleaned and dedusted with Paddy Cleaner(LIANGGONG). Below we a detailed description of the process of food cleaning and food dust removal.

Grain cleaning process: unloading grain pit fence → unloading grain pit → unloading grain conveyor → bucket elevator → suction separator → primary cleaning screen (one to two) → magnetic separator → bucket lifting → electric tee → Conveyor → electric gate (three links) → steel silo → electric (manual) gate → conveyor → bucket elevator → suction separator → grain cleaning sieve → quantitative packaging machine → finished product.

Grain cleaning and dust removal process: suction hood → suction vent → damper → brake kelong dust collector → pulse dust collector (bag dust collector) → fan → hood.

The entire dust removal process is also called the wind net, and it is customary to use the main equipment pulse dust collector, the squeaky dust collector, the fan, the air hood, the suction vent, the damper, the collecting pipe, the elbow, the deformation port and The pipe is called a wind network. The determination of the suction point is mainly set according to the requirements of the user. Generally, there are two kinds of dust suction points and equipment dust collection points. Because the grain pits are long and the area is large, the space for dust diffusion is large and uncertain, so it is difficult to control, and a separate wind network is generally provided. The suction of the equipment is generally closed, and the combination of close-up vacuums. The order of the equipment in the process can be changed according to the actual situation, the variety of the equipment can also be changed, and the number of equipment can also be increased or decreased.

Click Rice Destoner to learn about more information.