High density means that the grains in the ceramic body are tightly arranged, and it is not easy to form a destructive breakthrough point when the external load or corrosive substance erosion. This will not only decrease the strength, but also weaken wear resistance. In the building ceramics industry, the wear efficiency of alumina for grinding balls is increased by 20%to 40%compared with natural vermiculite and cobblestone.

The powder -making system generally uses glue and aluminum -oxide -resistant ceramic plates to paste the processed steel plate. For simple shapes, they can be molded with dry pressure. With the reduction of high -quality natural ball stone resources, the characteristics of the high wear rate of ordinary porcelain balls will be used by more and more manufacturers.

The final firing product can form a microcrystalline structure, which makes it have good China ceramic Eyelet abrasion resistance. Frequently worn the equipment was worn, which not only increased the burden of maintenance, but also seriously affected the normal operation of the equipment.

With its superb abrasive resistance, high temperature resistance, corrosion resistance and other excellent characteristics, wear -resistant ceramics has become one of the best wear -resistant materials at present, and has been widely favored by industrial enterprises, especially being deeply affected by cement manufacturers. The influence of the 02 molding method and a large number of studies have shown that the low -air pore rate and high density alumina ceramic structure has excellent structure.

Therefore, wear -resistant ceramic composite tubes have good abrasion resistance, heat resistance, corrosion resistance and anti -mechanical impact and thermal impact, weldability, and not falling off. The raw pulp conveying of the cement plant's rotary kiln wet production line, the coal transportation, the feeding of the promotioner, and the concrete transmission pipeline.

Steel factory's ceramic mechanical seal face iron -made blast furnace coal jets, slag -in -in -law and other pipelines, steelmaking transportation, iron alloy, out -of -the -furnace refinement and other preferably preferred pipelines.

Application of wear -resistant ceramic composite tube The coal industry is transported by water coal slurry, coal washing mud, mining fillers, and pipelines of coal pipes; pipeline transportation of concentrate ore and tailings in metal mines.

The abrasion -resistant ceramic composite tube combines high steel pipe strength, good toughness, impact resistance, good welding performance, and high hardness, high wear resistance, corrosion resistance, and heat resistance of Gangyu porcelain

Suitable for large pieces of materials with a certain gap, fix the three -in -one plate with bolts to the device, and the installation is China Textile Machine Ceramic Eyelet suppliers convenient and fast. Under different operating conditions, different composite ceramics need to be selected. The ceramic can use a flat tablet or welding plate. The three -in -one ceramic rubber steel plate is to integrate wear -resistant ceramics, rubber, and steel plates through thermal vulcanization, with bolts on the back of the steel plate, or a staple screw hole.

Powerful work. Ceramics and rubber use the thermal vulcanization process to sully vulcan and rubber sulfide together, and then use professional glue to paste it on the equipment. Ceramic rubber is two-in-one. Construction is more convenient and fast. It is suitable for a high temperature environment within 600 degrees.Block -shaped materials and equipment with large impact power for wear.

The protection equipment is not worn and impacted, saving the cost of maintenance equipment for the factory. Based on the abrasion resistance of ceramics and the buffering effect of rubber sheets, it can resist the impact of material transportation. Moreover, the weight of the composite plate is lighter than the steel plate, and the construction is more convenient.

Ceramics and rubber are sulfur with rubber vulcanizing through thermal vulcanization process.The abrasion -resistant ceramic rubber sheet is combined with alumina ceramics and rubber. Focusing on many companies. According to the cushionability of the rubber layer, this wear -resistant ceramic composite plate is very suitable for the fact that the large piece of material is dropped.

This abrasion-resistant ceramic composite board is suitable for environmental work that is used-20 degrees to 120 degrees, and is not suitable for high temperature operations because rubber will melt at high temperature