0xbt

The industrial chain should be the most common chain. In the process of industrial production, especially in many food processing, the conveyor chain is used in the way of the assembly line, which has a wide range of use and high frequency of use. Therefore, wear and tear failures often occur. If the improper use method is added, it will cause great damage to the chain. Let's introduce the China chain factory(GETECHAIN).

There are two main forms of industrial chain failure: one is failure caused by wear and tear; One is failure caused by fatigue.

Wear failure is the most common and obvious form of the industrial chain. There are many reasons for this failure. The main reasons are poor chain material and improper operation of workers. The most easily worn parts of the chain as a whole are sprocket and pin shaft. The wear of these two parts is mainly due to insufficient local lubrication, so in order to avoid this phenomenon, operators should pay attention to check the lubrication effect frequently, add lubricating oil in time, check whether there is abrasive in the lubricating oil or change the lubrication method. After the sprocket of the industrial chain is slightly worn, the sprocket can be reversely installed so that the less worn side faces the chain. In addition, if the use environment is harsh or the lubrication seal is not good, the hinge will be worn. Once the chain hinge is worn, the chain-link will become longer, which will easily cause tooth jump or chain release during operation, reduce the service life of the chain and accelerate the chain failure.

Let's talk about the failure of industrial chains caused by fatigue. At present, most factories in our country have workers rest and machines do not rest. Therefore, industrial chains are often overused and fail due to fatigue failure. That is to say, the chains bear excessive load during operation, resulting in uneven stress and easy breakage or extrusion. For this kind of situation, our chain factory can only solve it by strengthening parts.

In addition, in the process of low-speed and heavy-load transmission of industrial chains, overload breaking is also a common failure mode. Under certain service life, poor lubrication and sealing of the chain, or bad working conditions, will accelerate wear, leading to a significant reduction in the limit power, resulting in the failure of overload pull-off.

If you are interested in our products, you can click Driving chain manufacturer to learn more information.