0xbt

After the 40 degrees Celsius is compressed by the fan, the temperature will be further improved. In order to ensure the bearings, lubricating oil, , Gear and leaf wheels can work normally. The temperature after boosting should not be too high, generally about 90 degrees Celsius.

If the temperature of the gas we transport exceeds 40 degrees Celsius, such as: saturated water vapor with higher temperature, and the temperature of the fan will also be improved, such as stainless steel, or anti -corrosion treatment of the fans, sealing methods, sealing methods, sealing methods. Replacement, bearing and fuel tanks cool down, etc., special treatment is required to be used. In most cases of the Ruz fan, the cleaning air is transported.

The temperature of the cleaning air is lower than 40 degrees Celsius, which can ensure the normal operation of the fan. The conventional configuration is used: cast iron material, piston ring dense seal, and air -cooled form. Los. Second, the pipeline is blocked and the pipeline is blocked. Increasing the release of heat, ultra -pressure is a more dangerous failure.

The motor of the fan is easy to burn,2Hp Impeller Paddle Wheel Aerator and it is also the influencing factor of the rise in the temperature of the Ruz fan. Finally, the influence of the intake temperature, the temperature of the intake of ordinary fans cannot exceed 40 degrees Celsius, and the transportation media is that in this case, if the cooling is not smooth, there may be an intake temperature of more than 40 degrees Celsius, and the temperature of the fan port will rise. high. Excessive temperature affects the spare parts of the fan.

For example: sealing, bearing, water tank lubricating temperature, etc. These may cause fan failure. Therefore, in the daily patrol work, the temperature of the fan is also the test content. The temperature of the daily fan is monitored to ensure that the temperature of the fan does not exceed a certain range.