0xbt

The preliminary condition and situation must be clear before the selection of the universal shaft: 1. Requires dynamic balance or balance, and which level of balance quality is required. Through the understanding of the above prerequisites, gradually determine the specifications of the universal axis, and after ZUI, determine which structure form.

To choose a universal axis suitable for the original motivation from so many universal axes, you need to deeply understand the prerequisites and external influencing factors described above. What is the speed of the cross -shafts itself.

It is necessary to know the connection form and specific installation size requirements of both ends of the universal axis, as well as special requirements such as installing brackets. It is necessary to make the axis folding as much as possible than 3 degrees. The viscosity is the main performance indicator, for lubricating oil.

Due to the characteristics of the resin response, the continuous running time is relatively long, and there is no other means to heat dissipation without other means, and the temperature will gradually accumulate.Under the premise of not adding any function additives, the greater the viscosity, the higher Interpart Axle manufacturers the strength of the oil membrane, and the worse the liquidity.

The couplet, the universal axis, the joint manufacturer, the universal transmission shaft, the viscosity of the universal section couplet reflects the internal friction of the oil, indicates a indicator of the oily and liquidity of the oil.

The temperature of the oil is low, the viscosity is large without enough liquidity, and the method of splashing lubrication requires the oil to have better liquidity. The axle that is higher than this speed and is greater than this torque is generally lubricated with lubricant.