<![CDATA[0xbt: How To Replace a Damaged Quick Fitting O-ring?]]> https://0xbt.net/blog/view/154179/how-to-replace-a-damaged-quick-fitting-o-ring https://0xbt.net/blog/view/154179/how-to-replace-a-damaged-quick-fitting-o-ring Sat, 25 Jul 2020 09:10:42 +0000 https://0xbt.net/blog/view/154179/how-to-replace-a-damaged-quick-fitting-o-ring <![CDATA[How To Replace a Damaged Quick Fitting O-ring?]]> 1.Remove the collet. Using your fingers, extract the collet from the mouth of the quick fitting.
2.Pull the O-ring out of its well. To remove the O-ring from the well, locate a thin, flat tool. Tweezers, a toothpick, or a nail file will all be able to reach down and loosen the O-ring.
3.Tamp a new O-ring into the fitting. Using a piece of tubing, push the new O-ring into the fitting. Push on the tubing until the O-ring flattens and stays in place.
4.Slide the collet back into the fitting. Replace the collet into the fitting, and your quick-connect fitting is back in action.

The push fit fitting is one of our products, welcome to your come and purchase!

]]> fittingtony