0xbt

Therefore, the bearing maintenance work is carried out around clean, lubricated, sealed, and environmental four words. Good sealing ensures the normal operation of the machine, reducing noise, extending the service life of the related components. The above is a related introduction to the daily maintenance of the bearing. If the oil seal of the bearing and its surrounding parts is poor, please replace it to avoid damage to the bearing due to poor oil seal.

In fact, these four aspects are also interrelated, such as bearing seals to keep the bearings lubrication and clean, and the working environment. When the bearing work environment Check the bearings, do not expose it to contaminants or moisture. It is mainly explained by four aspects. To ensure that the quality of the bearing lubricant is later discovered that the bearing life is too short, in addition to other factors, the quality of the lubricant is also directly affected.

If the work is interrupted, the machine should cover the oil paper plastic plate or the like. The lubricant of the bearing is then replaced. There are many imported bearings in the machine. This is because the work environment does not work, leading to the end of the imported bearing life. Pay special attention to the oil seal is a very fragile part, so do not use too much force when checking and disassembling the bearing, so as not to cause the part.

The test method of the bearing lubricant is to rub the lubricant between the two fingers, and if there is a contaminant, it can feel; or a thin lubricant is applied to the back of the hand, and then the sealing examination is performed. It is also related to cleaning. The Wholesale China wheel bearing kit manufacturers work environment of the bearing is also very important.What is the daily maintenance of the bearing?

Next, let's take a closer look at the daily maintenance of the bearings. Keep the bearing lubrication and clean before checking the bearing, first clean the surface of the bearing surface, then remove the components around the bearing. The purpose of the bearing seal bearing seal: prevent dust, moisture and impurities from entering the bearing, and prevents the lubricant from being lost.