0xbt

Building Tempered Glass is truly a type of prestressed a glass. In order to improve the strength of the magnifying glaas, chemical or physical methods usually are used to form compressive stress to the surface of the goblet. When the glass is afflicted by external force, the floor stress is first offset, thereby improving the displaying capacity and improving the glass resistance. Pull power. The main advantages connected with tempered glass are not one but two. The first is that the strength is several times above that of ordinary a glass, the bending strength is Less than 6 times that of standard wire glass price, and the consequence strength is 5 to 10 times that of ordinary glass, which increases the strength. Security. Safety of use is the second major selling point of physical tempered glass. Their increased load carrying ability improves the fragile design. Even if the tempered glass stops working, it will show little fragments without sharp aspects, and the damage to the human body is greatly reduced. The quenching and heat resistance of tempered glass is 2 to 3 times higher than this of ordinary glass. Normally, it can withstand temperature changes of more than 150C, which has obvious effects on preventing thermal cracking.

Semi-tempered glass can be called Heat Strengthened A glass. It is a sort of between ordinary flat tumbler and tempered glass. These have the characteristics of higher strength of tempered glass. At the same time, it avoids the flatness of tempered glass and it is easy to self-explosion. Disadvantages including overall crushing. When that semi-tempered glass breaks, it is radially radial cracked across the crack source, and generally there's no tangential crack propagation, so the whole can not remain collapsed following on from the damage. Semi-tempered glass works for curtain wall and also exterior window in properties. It can be created into semi-tempered coated tumbler with image distortion greater than tempered glass. However, it should be mentioned that semi-tempered glass is not within the safety glass range. Because it is broken, there are still sharp fragments which could injure people and can not be used in skylights in addition to occasions where human effects may occur. The floor compressive stress of semi-tempered cup is between 24MPa and 69Mpa, and the surface demand of tempered glass ought to be greater than 69MPa. The production process connected with semi-tempered glass is similar to that of tempered cup. The wind pressure is different in the quenching rail station, and the resistance for you to quenching and heat is under that of tempered tumbler.