The protection equipment is not worn and impacted : 0xbt

The protection equipment is not worn and impacted

The abrasion -resistant ceramic composite plate is divided into three types, two -in -one ceramic steel plates, ceramic rubber composite plates, and ceramic rubber steel plate triple -in -one composite plates. The two -in -one ceramics and steel plates are directly pasted on the steel plate directly on the steel plate.

Suitable for large pieces of materials with a certain gap, fix the three -in -one plate with bolts to the device, and the installation is China Textile Machine Ceramic Eyelet suppliers convenient and fast. Under different operating conditions, different composite ceramics need to be selected. The ceramic can use a flat tablet or welding plate. The three -in -one ceramic rubber steel plate is to integrate wear -resistant ceramics, rubber, and steel plates through thermal vulcanization, with bolts on the back of the steel plate, or a staple screw hole.

Powerful work. Ceramics and rubber use the thermal vulcanization process to sully vulcan and rubber sulfide together, and then use professional glue to paste it on the equipment. Ceramic rubber is two-in-one. Construction is more convenient and fast. It is suitable for a high temperature environment within 600 degrees.Block -shaped materials and equipment with large impact power for wear.

The protection equipment is not worn and impacted, saving the cost of maintenance equipment for the factory. Based on the abrasion resistance of ceramics and the buffering effect of rubber sheets, it can resist the impact of material transportation. Moreover, the weight of the composite plate is lighter than the steel plate, and the construction is more convenient.

Ceramics and rubber are sulfur with rubber vulcanizing through thermal vulcanization process.The abrasion -resistant ceramic rubber sheet is combined with alumina ceramics and rubber. Focusing on many companies. According to the cushionability of the rubber layer, this wear -resistant ceramic composite plate is very suitable for the fact that the large piece of material is dropped.

This abrasion-resistant ceramic composite board is suitable for environmental work that is used-20 degrees to 120 degrees, and is not suitable for high temperature operations because rubber will melt at high temperature