0xbt

Once the glutinous oil appears or volatilizes during the entire application process, leftover, leftover, leftover, and leftover The calcium soap itself does not have smooth results in itself. The local area with smooth demand will still overflow, so the butter is full but not actually. .

Because calcium -based glutinous grease is made of oil and calcium soap, it is not possible to use calcium -based glutinous grease to develop the universal axis. When measured with a percentage table, the percentage table should have a satisfactory balance to prevent the marked position of the error data measurement of the error data due to the dying of the surface rod.

Finding the dedicated tools on the shaft device will not affect the measurement of the car. When measured, the two -half joints cannot have any rigid connection. Each car should be corresponding to the mark to prevent errors. Drive the rotor and check whether there is a dynamic sound, you should be sure that the rotor is not pressed on the oil gear and steam seal teeth.

You need to loosen the temporary sales between the two -half bearing, and loosen the steel wire rope of the plate to record the data. Before weighing, organize the bearing box to clean up to prevent the positioning of the device of each bearing tile correctly, and whether the neck has a good touch in the bearing and a bearing tile in the bearing nest.

Finding the dedicated tools should be fixed to prevent OEM Birfield(BJ) UF CV Joint Manufacture the accuracy of measurement due to loosening. When moving the rotor, there must be a person with a person. Cover the various necks with a cover to prevent the debris and dust from falling.

Pay attention not to overpower or not in place during the car, affect the accuracy of measurement. Sort out the axis tiles and the neck to keep it clean, without dust and impurities.