0xbt

Introduction:
JIC Fitting is a selection of hydraulic fittings that is made in accordance to the SAE J514 requirements. The acronym JIC stands for Joint Industry Council. It's likewise known as the JIC 37 degrees flare fitting as it has a thirty seven degrees flare seating area. These fittings are used on oil hydraulic methods in fields which are numerous (fuel delivery, fuel power application, shipbuilding, mobile hydraulic tools, etc...). A JIC fitting device has 3 components which produce a tubing assembly: fitting, flare nut, and sleeve.

Material:
Materials used-to fabricate JIC fittings are carbon steel as well as stainless-steel SS316L.

Sizes:
JIC body and flare nut are obtainable in exterior diameter ("OD) sizes between 1/8" to one 2". Sleeve has two distinct reading measurements, metric size (mm) & inch exterior diameter ("OD). Sleeve size is available from 3mm to 50mm and 1/8" to 2". Connecting sizes are designated by the corresponding outside diameter of the tubing for the various types of tube ends.

Working Pressure:
The typical working pressure of the fittings ranges from thousand to 5000 psi for several sizes & contacts. The minimum burst stress is four times the working strain. The JIC fittings have to be in a position to withstand two times the working strain for a period of one minute without leakage or failure.
Remember to take note that the pressure rating of an exact same fitting may vary when it's connected to various equipments.. For instance, if a fitting with a minimal performing pressure is attached to a pipe, it is going to result in an overall much lower working strain. In all cases, often think about the lowest pressure as the maximum working pressure of the system.

How does a JIC fitting works: For lean belly juice reviews tube connections, the assembly treatment starts off out of the planning of the tube. For starters, the nut and sleeve are inserted onto the conclusion of a hose. Considering the usage of a flaring tool, create the conclusion of the hose to thirty seven degrees. Next, firm up the nut by making use of a spanner till the nut is firm and also the sleeve grips onto the tube. In case the fittings are bench assembled, the gripping action can be driven by rotating the tube by hand as the nut is drawn down. When the tube could not anymore be driven by hand, the sleeve has gripped onto the tube. When this happens,, tighten the nut by switching it one complete turn. This might vary slightly with some other tubing materials, but for common practice, it's a great rule to adhere to.

Configurations of JIC Fitting: Commonly utilized connection sorts be made up of: JIC/BSPP Male Connector, JIC/ NPT Male connector, JIC union, JIC/NPT Swivel Male Connector, JIC/BSPP Swivel Male Connector.

Brand of JIC Fittings:
HS Corporation is a Korean manufacturer specializing in JIC Fitting. Established in 1980, HS Corporation has over thirty years of specialised experience in manufacturing fittings.